Skip to content
Request Support View Tickets Sign in
  • There are no suggestions because the search field is empty.

Access configuration mode on your H106 Wireless Kill Switch

Access configuration mode on your H106 Wireless Kill Switch

Before accessing configuration mode, take note of the following:

  • Some systems need a password to make changes to certain settings. If you're an operator or fleet owner, consult your equipment dealer or manufacturer.
  • Some configuration features need the C220 to be powered on and matched with your remote device before changes can be made.

Make sure your H106 is powered off.

  1. Press and hold the red button.
  2. Press and hold the green button.
  3. Release the red button.
  4. Continue to hold the green until the two LED lights become solid.
  5. Release the green button as soon as the red LED turns solid. You may not be able to save settings if you continue to hold the green button.

Your device is now in configuration mode.

Configure your device

Use the following buttons to configure your device:

  • Bottom right button to scroll through the available optionsupdated h106 face bottom right
  • Top two buttons to change settings
    updated h106 top two
  • Green button to save changes
  • Red button to cancel and exit

Make your changes and save them. Press the red button to exit configuration mode. Turn your remote device on normally. Your new settings are now active.